Sometimes, new Hp f1382a Battery maybe have erratically until they have been charged or discharged after several circles. In this case, I will give you some information for your reference. You may just have a try according to the instructions below.
New Hp f1382a Battery is shipped out to customer in a discharged condition or with very low capacity and must be drained before use. We generally recommend an overnight charge (approximately twelve hours). Refer to the user's manual for charging instructions. Rechargeable batteries should be cycled (fully charged and then fully discharged) three to five times initially to make them reach full capacity. (Note: it is normal that battery becomes warm during charging and discharging).
New Hp f1382a Battery is hard for the device to charge; they have never been fully charged and are therefore "unformed". Sometimes the device's charger will stop charging a new battery before it is fully charged. If this happens, remove the battery from the device and then reinsert it. The charge cycle should begin again. This may happen several times during the first battery charge. Don't worry; it's perfectly normal.
Instruction :
Please try to fully discharge and fully charge the Hp f1382a Battery according to the following instruction.
1. Install the battery in your laptop or camera and power on until it power off. In this situation, the battery is fully discharged.
2. Then fully charge the battery.
3. Fully charge and fully discharge the battery or "cycle" at least five times to condition the battery into performing at full capacity.
If the Hp f1382a Battery does not work yet, please feel free to
contact us.
Capacity : 3600mAh
Liked this battery? Click to make this battery popular